---
title: "Remo Powersonic Clear"
brand: "Remo"
category: "Drumhead"
url: "https://thedrumatlas.com/drumheads/remo-powersonic-clear"
updated: "2026-09-24"
reviewed: "no"
---

# Remo Powersonic Clear

The Remo Powersonic Clear is a bass drum head of two plies — 7 mil over 5 — with dampening rings placed specifically to control subsonic content. Two plies self-damp, and the placed rings target what a bass drum actually needs controlling, giving focused low-end with increased attack.

**Sizes:** 18 in, 20 in, 22 in, 24 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Plies | 2 | verified | Remo |
| Film thickness | 7 + 5 mil | verified | Remo |
| Coating | Clear | verified | Remo |
| Position | Batter | verified | Remo |
| Dampening | Specifically placed subsonic dampening rings | verified | Remo |
| Intended use | Bass drum | verified | Remo |
| Character | Focused low-end with increased attack | verified | Remo |

## Placed rings, not a ring

The phrase on Remo's page is worth reading carefully: **specifically placed subsonic dampening rings**.
Plural, and placed.

Most damped bass drum heads carry one ring around the perimeter. That is a sound design and it deals
with edge overtones. But a 22-inch membrane has more going on than an edge and a centre — it has a whole
set of modes at different radii, and the low-frequency ones are where a bass drum's boom and its
uncontrolled sub content live.

Putting dampening in more than one place lets those be targeted individually, which is a different
proposition from damping the rim and hoping.

## Two plies underneath it

Seven mil over five, unevenly matched on purpose. The thicker ply takes the beater; the thinner one does
the two-ply damping job without the mass a matched pair would add.

That gives the head self-damping before the rings do anything — the plies move slightly against each
other and turn vibration into heat — and it gives the beater a stiffer surface to work against, which
sharpens the transient.

Twelve mil total, in two layers, is a moderate weight for a bass batter. This is not a head that gets
its control from sheer thickness.

## Clear, and the attack

Remo's description for this version is focused lows with **increased attack**, and clear film is why.
There is no coating adding mass to the playing surface, so the beater transient comes through hard and
defined — which is what a bass drum needs when it has to be heard through a loud band rather than felt.

That single word is the whole difference between the two heads. If the drum needs to read as a thud rather than a hit, the coated version is the one.

## Where it fits

Bass drum batters 18 to 24 inch, where the low end must be focused and the sub content
controlled without a pillow in the drum. Remo's SMT range is the alternative approach — an integral
pre-muffled construction rather than placed rings.

## Sources

1. Powersonic Clear — Remo (tier 1) https://remo.com/product/powersonic-clear

---
Source: https://thedrumatlas.com/drumheads/remo-powersonic-clear · Values marked "unverified" are editorial knowledge awaiting a source.
