---
title: "Remo Emperor SMT Ebony"
brand: "Remo"
category: "Drumhead"
url: "https://thedrumatlas.com/drumheads/remo-emperor-smt-ebony"
updated: "2026-09-24"
reviewed: "no"
---

# Remo Emperor SMT Ebony

The Remo Emperor SMT Ebony is a bass drum head of two plies — 7.5-mil Ebony over 5-mil clear — with Sub Muffl Technology, Remo's integral pre-muffled construction. The black film adds no damping of its own, so the control comes entirely from the plies and the muffling, and Remo lists it for all applications.

**Sizes:** 16 in, 18 in, 20 in, 22 in, 24 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Plies | 2 | verified | Remo |
| Film thickness | 7.5 + 5 mil | verified | Remo |
| Coating | Ebony | verified | Remo |
| Position | Batter | verified | Remo |
| Intended use | Bass drum | verified | Remo |
| Dampening | Sub Muffl Technology — an integral pre-muffled design | verified | Remo |
| Character | Controlled high and mid frequencies with powerful low tones and subsonic attack | verified | Remo |

## Slightly heavier than its siblings

The clear and coated Emperor SMT heads are built from 7-mil and 5-mil plies. This one is **7.5-mil
Ebony over 5-mil clear** — a half mil more on the outer ply, which is the one that takes the beater.

That is a small difference and it points the same way as everything else about Ebony film: this is a
head whose behaviour comes from its construction rather than from a surface treatment. Ebony is
Remo's opaque black stock, black all the way through, with no coating adding mass on top. So the
damping here is two plies plus **Sub Muffl Technology**, Remo's integral pre-muffled design, and
nothing else.

## All applications, not just jazz and contemporary

A small but real difference in Remo's own wording: the clear and coated SMT pages describe a broad
tuning range for jazz and contemporary applications, while the Ebony page says a broad tonal spectrum
of tuning ranges for **all** applications.

That is a defensible distinction. An Ebony head has no coating to abrade and no clear window to scuff,
and the extra half mil on the outer ply widens what it will take. It is the most generally applicable
head of the three.

## On the front of the drum

A bass drum's resonant head is the one an audience looks at, and an Ebony SMT gives a plain matte
black face with no logo and no gloss. Pre-muffled construction on a front head is less usual than on a
batter, and it is useful: it brings the resonant head's contribution to the ring down without a port
having to be cut.

Left whole, the drum breathes and holds more of its low end. Ported, it goes considerably drier and
becomes easier to mic — and black film hides a port far better than white or clear does.

## Where it fits

Bass drum, batter or front, 16 to 24 inch, where the drum should read black and arrive already
controlled. The clear and coated Emperor SMT heads are the same construction with the playing surface
changed.

## Sources

1. Emperor SMT Ebony — Remo (tier 1) https://remo.com/product/emperor-smt-ebony

---
Source: https://thedrumatlas.com/drumheads/remo-emperor-smt-ebony · Values marked "unverified" are editorial knowledge awaiting a source.
