---
title: "Remo Emperor SMT Coated"
brand: "Remo"
category: "Drumhead"
url: "https://thedrumatlas.com/drumheads/remo-emperor-smt-coated"
updated: "2026-09-24"
reviewed: "no"
---

# Remo Emperor SMT Coated

The Remo Emperor SMT Coated is a bass drum batter of two coated plies — 7 mil over 5 — with Sub Muffl Technology, Remo's integral pre-muffled design. Two plies plus the coating plus the muffling make this the most controlled head in the SMT range, while the construction still leaves powerful lows and subsonic attack.

**Sizes:** 16 in, 18 in, 20 in, 22 in, 24 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Plies | 2 | verified | Remo |
| Film thickness | 7 + 5 mil | verified | Remo |
| Coating | Coated | verified | Remo |
| Position | Batter | verified | Remo |
| Intended use | Bass drum | verified | Remo |
| Dampening | Sub Muffl Technology — an integral pre-muffled design | verified | Remo |
| Character | Controlled high and mid frequencies with powerful low tones and subsonic attack | verified | Remo |

## Three things damping one head

Worth laying out, because this is the most thoroughly controlled bass drum batter Remo lists.

**Two plies** — 7 mil over 5 — sliding minutely against each other and turning vibration into heat.

**A coating** on the playing surface, adding mass that softens the beater transient and shortens the
decay further.

**Sub Muffl Technology**, Remo's integral pre-muffled construction, taking out the high and mid
content that survives the first two.

Nothing has to be added inside the drum for this head to behave. That is the design intent, and it is
why the SMT range exists.

## What comes out

Remo's description across the range is controlled high and mid frequencies with powerful low tones,
and additional attack with subsonic low frequencies. On the coated two-ply that reads as a short, warm,
low thud with a woody front edge rather than a click.

For a very large proportion of modern recorded and amplified drumming, that is the target sound, and
getting there usually involves a coated batter, a muffling ring and a pillow. This head is an attempt
to do it in one part.

## Why coated rather than clear

Because most players tuning a bass drum are chasing a thud, not a click. The coating rounds the beater
transient — audibly, before any EQ — and it makes the impact read as lower and warmer.

It also wears where the beater lands, which is genuinely useful: a coated bass batter tells you
visibly when it is finished, while a clear one has to be judged by feel.

## Tuning it

Two plies of 7 and 5 mil is enough film to take real tension, and the pre-muffled construction works
across the range rather than at one setting, because the muffling is a free-floating internal design
rather than a bonded ring.

Low and slack gives the modern kick sound. Brought up, the drum keeps more pitch and more attack — the
tighter end of the range is where the two-ply advantage over the Ambassador SMT is most obvious.

## Where it fits

Bass drum batter, 16 to 24 inch, when the drum needs to be controlled and warm out of the packet. The
Ambassador SMT Coated is the single-ply version for a more open drum; the clear Emperor SMT keeps more
attack.

## Sources

1. Emperor SMT Coated — Remo (tier 1) https://remo.com/product/emperor-smt-coated

---
Source: https://thedrumatlas.com/drumheads/remo-emperor-smt-coated · Values marked "unverified" are editorial knowledge awaiting a source.
