---
title: "Remo Ambassador Snare Side"
brand: "Remo"
category: "Drumhead"
url: "https://thedrumatlas.com/drumheads/remo-ambassador-snare-side"
updated: "2026-09-16"
reviewed: "yes"
---

# Remo Ambassador Snare Side

The Remo Ambassador Snare Side is a single ply of 3-mil film — a third the thickness of a batter head — fitted to the underside of a snare drum for the wires to sit against. Hazy is the warmer and more common finish; Clear is brighter and more cutting.

**Sizes:** 13 in, 14 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Plies | 1 | verified | Remo |
| Film thickness | 3 mil | verified | Remo |
| Position | Resonant — snare side | verified | Remo |
| Finish | Hazy (warmer) or Clear (brighter) | verified | Remo |
| Coating | Clear, or hazy | verified | Remo |
| Voicing | Balanced high and mid frequencies | verified | Remo |
| Thinner alternative | Diplomat Snare Side, 2 mil — more sensitive | verified | Remo |

## The thinnest head on the kit, and the most consequential

Three mil. A batter head is 10; an Emperor is two plies of 7. This is a third the thickness of
either, and it is the reason a snare drum sounds like a snare drum.

The wires do not respond to the batter head. They respond to the **resonant head** moving beneath
them, driven by the air column inside the shell. A thin head moves more for a given amount of
energy, so a thinner snare side means the wires react to less — which is exactly what sensitivity
is.

Three mil is the balance point Remo settled on: responsive enough for ghost notes, sturdy enough to
survive being tuned tight and being poked by a stick that missed.

## Why it is the shortest-lived head you own

It is also the one most people never change.

Three mil of Mylar tensioned to snare-side pitch is living close to its limit. Snare sides do not
usually dent — they tear, often at a lug, and often with no warning. A drum that has suddenly lost
its crispness and gone dull has very often just stretched its resonant head past usefulness.

The rule of thumb worth having: **when the snare stops sounding crisp, change the bottom head
before you change the top one.** It is the cheaper head, it is almost certainly the older one, and
it is the one actually producing the sound you have lost.

## Hazy or Clear

Two finishes, and the difference is real if small.

**Hazy** is translucent rather than transparent — a light frosting on the film. It is fractionally
more damped, which warms the response and rounds the top end. It is the standard for drum kit and
the one most players should buy.

**Clear** is fully transparent and undamped. Brighter, more cutting, a touch more crack.

If you are not sure, buy hazy. It is what is on most snare drums in most studios.

## Two mil, if you want more

Remo makes a **Diplomat Snare Side** at 2 mil for players who want maximum sensitivity — orchestral
work, quiet playing, anything where the faintest ghost note has to speak.

It is noticeably more responsive and noticeably more fragile. For most drum-kit playing the
Ambassador's 3 mil is the better trade; for a concert snare the Diplomat is often the right head.

## Tuning it

Snare sides are tuned high — considerably higher than the batter, usually near the top of what the
head will take. A slack snare side gives a dull, loose, choked response no amount of wire tension
will rescue.

The wires then need only enough tension to stop them buzzing freely. Over-tightening the wires to
compensate for a slack resonant head is the single most common snare tuning mistake, and it chokes
the drum.

## Sources

1. Ambassador Clear Snare Side — Remo (tier 1) https://remo.com/product/ambassador-clear-snare-side
2. Understanding drumhead types and differences — Remo (tier 1) https://support.remo.com/hc/en-us/articles/360052028852-Understanding-Drumhead-types-and-differences
3. Ambassador Hazy Snare Side — Remo (tier 1) https://remo.com/product/ambassador-hazy-snare-side

---
Source: https://thedrumatlas.com/drumheads/remo-ambassador-snare-side · Values marked "unverified" are editorial knowledge awaiting a source.
