---
title: "Code Zero"
brand: "Code Drumheads"
category: "Drumhead"
url: "https://thedrumatlas.com/drumheads/code-zero"
updated: "2026-09-24"
reviewed: "no"
---

# Code Zero

Zero is a coated single ply of 10 mil film with a reverse donut dot on the underside. Putting a hollow ring of reinforcement below the head leaves the coated playing surface unbroken and the centre of the film free, so the drum gains durability at the strike point without losing its fundamental.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Plies | 1 | verified | Code Drum Heads |
| Film thickness | 10 mil | verified | Code Drum Heads |
| Coating | Coated | verified | Code Drum Heads |
| Position | Batter | verified | Code Drum Heads |
| Reinforcement | Reverse donut dot | verified | Code Drum Heads |
| Hoop | Grip-Tight — double-knurled steel core in an aluminium or steel outer rim | verified | Code Drum Heads |

## Two ways of being unobtrusive

Zero takes both of the options that make a reinforced head behave more like an unreinforced one. The
dot is on the underside, so the stick and the brush never meet it. And it is a donut rather than a
disc, so the centre of the head is still a single thickness of film.

Between them those choices remove most of what people dislike about dotted snare heads: the hard spot
under the tip, the slick circle that brushes skate across, and the deadened fundamental.

## What is left

What remains is a coated 10 mil single ply — the most versatile snare batter specification there is —
with a ring of extra material sitting under the area that wears out first.

That is a narrower claim than most dotted heads make, and a more useful one for a working snare. You
are not buying a different sound; you are buying a longer life out of the sound you already wanted.

## The rim, and the bedding-in question

Code builds every head on its Grip-Tight rim: a double-knurled steel core crimped into an aluminium
or steel outer rim, with no adhesive. The company is direct about what follows — there is no need to
press a new head down to make it crack and settle, because there is no glue bond to break. Fit it and
tune it.

## Sources

1. Zero — Code Drum Heads (tier 1) https://www.codedrumheads.com/products/zero
2. Grip-Tight rim technology — Code Drum Heads (tier 1) https://www.codedrumheads.com/about/griptight

---
Source: https://thedrumatlas.com/drumheads/code-zero · Values marked "unverified" are editorial knowledge awaiting a source.
