---
title: "Code Genetic"
brand: "Code Drumheads"
category: "Drumhead"
url: "https://thedrumatlas.com/drumheads/code-genetic"
updated: "2026-09-24"
reviewed: "no"
---

# Code Genetic

Genetic is Code’s clear snare side head, sold as the Genetic 3 and the Genetic 5. It is the head the wires sit against, and it governs how readily a snare drum answers a quiet stroke — built, like the rest of the range, on Code’s glue-free Grip-Tight rim rather than a bonded hoop.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Position | Snare side | verified | Code Drum Heads |
| Coating | Clear | verified | Code Drum Heads |
| Hoop | Grip-Tight — double-knurled steel core in an aluminium or steel outer rim | verified | Code Drum Heads |

## Two weights, and what Code publishes about them

Code lists the Genetic as two products, the 3 and the 5, and describes both simply as a clear snare
side head. The numbers follow the convention every maker uses for snare sides — Evans runs a 200, 300
and 500, Attack an Extra Thin and a Medium — but Code does not publish a film thickness for either,
so none is stated here.

What the two-model structure does tell you is that Code expects players to choose a weight, which is
the right instinct. A snare bottom head is the single component with the most influence on how a drum
responds at low volume.

## Why the bottom head decides so much

The wires do not touch the batter head. They rest against the snare side head, and every ghost note,
brush stroke and buzz roll you hear depends on that thin membrane moving enough to push them.

A lighter snare side head starts moving sooner and gives more sensitivity at the quiet end. A heavier
one takes more energy, which lowers the pitch it contributes and makes the drum darker and more
controlled — at the cost of some delicacy. That, rather than anything about the batter, is usually
the fix for a snare drum that will not speak.

## The rim

Code’s Grip-Tight construction matters more here than anywhere else on the kit, because a snare side
head runs tight and a thin film is the most likely thing in the drum to pull out of its channel. A
double-knurled steel core crimped into a metal outer rim, with no adhesive, is Code’s answer — and
the company’s guidance follows: fit the head and tune it, without pressing it in first.

## Sources

1. Genetic 3 — Code Drum Heads (tier 1) https://www.codedrumheads.com/products/genetic-3
2. Genetic 5 — Code Drum Heads (tier 1) https://www.codedrumheads.com/products/genetic-5
3. Grip-Tight rim technology — Code Drum Heads (tier 1) https://www.codedrumheads.com/about/griptight

---
Source: https://thedrumatlas.com/drumheads/code-genetic · Values marked "unverified" are editorial knowledge awaiting a source.
