---
title: "Pearl Masters Maple"
brand: "Pearl"
category: "Drum kit"
url: "https://thedrumatlas.com/drum-kits/pearl-masters-maple"
updated: "2026-09-24"
reviewed: "no"
---

# Pearl Masters Maple

Masters Maple is Pearl's all-maple flagship shell: six plies at 7.5 mm with a 45-degree bearing edge, MasterCast die-cast hoops, Classic Bridge lugs and the R2 air suspension system with a 12 mm L-rod mount. Shell packs are built around a 22 x 16 in bass drum with 10, 12 and 16 in companions.

**Sizes:** 22 × 16 in, 10 × 7 in, 12 × 8 in, 16 × 16 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Shell material | Maple | unverified | Thomann |
| Plies | 6 | unverified | Thomann |
| Shell thickness | 7.5 mm | unverified | Thomann |
| Bearing edge | 45 degrees | unverified | Thomann |
| Hoops | MasterCast die-cast | unverified | Thomann |
| Lugs | Classic Bridge | unverified | Thomann |
| Tom mount | R2 air suspension, with a 12 mm L-rod arm | unverified | Thomann |
| Sizes shown | The 22 in four-piece shell pack; a second floor tom and a snare are bought separately | unverified | Thomann |

## A note on sourcing

Pearl's own website is not reachable from this project, which is recorded as blocker B6. Every
specification on this page therefore comes from a retailer listing and is marked unverified. The
figures are consistent across the Masters range as retailers describe it, but no Pearl page has
been opened to confirm them.

## Six plies of maple at 7.5 millimetres

Masters Maple is Pearl's straightforward all-maple shell, and 7.5 mm across six plies puts it in
the medium-to-thick band. That is a deliberate position: thinner all-maple shells are warmer and
more shell-dominated, thicker ones are louder and more head-dominated, and Masters sits close to
the middle.

Combined with a 45-degree edge — which minimises head contact and lets the drum open up — the
result is a kit with a strong fundamental, a broad tuning range and enough projection to work
without help.

## MasterCast hoops

Die-cast hoops are heavier and considerably stiffer than triple-flanged steel, and they change a
drum's behaviour in two ways: the head is held more evenly around its circumference, which makes
tuning more consistent, and the extra mass damps the edge overtones, which tightens the note.

On a maple shell that would otherwise ring generously, die-cast hoops are a sensible pairing. The
kit is focused rather than open, which is why it records as easily as it does.

## R2 and the 12 mm L-rod

Pearl's R2 mount holds the tom by its tension rods rather than clamping the shell, so the drum is
free to vibrate. The 12 mm L-rod is thicker than the 10.5 mm arms used lower in the Pearl range —
stiffer, and less inclined to let a heavy tom creep out of position.

## Against Masters Maple Complete and Maple/Gum

Masters is a family rather than a single kit. The all-maple shell here is the most neutral and
most generally useful of them; the Maple/Gum version is warmer and rounder in the mids, and the
Complete is the earlier generation of the same idea.

## Sources

1. Pearl Masters Maple 22" 4-pc S. #858 — Thomann (tier 2) https://www.thomann.de/gb/pearl_masters_maple_22_4_pc_s_858.htm

---
Source: https://thedrumatlas.com/drum-kits/pearl-masters-maple · Values marked "unverified" are editorial knowledge awaiting a source.
