---
title: "DW Collector's SonicPly"
brand: "DW"
category: "Drum kit"
url: "https://thedrumatlas.com/drum-kits/dw-collectors-sonicply"
updated: "2026-09-24"
reviewed: "no"
---

# DW Collector's SonicPly

SonicPly is DW's hybrid metal and maple shell: a 9-ply 333 maple shell with a 1/36 in aluminium sheet in place of the middle ply, on drums from 10 to 24 in. Toms are cut at 45 degrees and bass drums at 60, and the result sits higher, brighter and shorter than pure maple.

**Sizes:** 22 × 18 in, 10 × 8 in, 12 × 9 in, 14 × 12 in, 16 × 14 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Shell material | Maple with an aluminium core ply | verified | Drum Workshop |
| Plies | 9 — 9-ply 333 maple with a 1/36 in aluminium sheet replacing the middle ply | verified | Drum Workshop |
| Bearing edge | 45 degrees on toms; 60 degrees on bass and snare drums | verified | Drum Workshop |
| Against pure maple | Higher in pitch, brighter in tone and shorter in sustain than a Pure Maple 333 shell | verified | Drum Workshop |
| Sizes shown | The 10/12/14/16/22 exotic five-piece as configured; SonicPly is available across the Collector's Series | verified | Drum Workshop |
| Built in | DW's Custom Shop | verified | Drum Workshop |

## Metal where a ply should be

SonicPly replaces the middle ply of a 9-ply maple shell with a sheet of aircraft-grade aluminium
1/36 in thick. The maple either side of it is unchanged: it is DW's 333 shell, the same one the
Pure Maple Collector's drums use.

Aluminium is far stiffer and denser than maple, so putting it at the shell's neutral axis raises
the cylinder's stiffness without adding much thickness. A stiffer shell resonates higher and
releases the head's energy faster, which is precisely what DW reports: against a Pure Maple 333
drum, SonicPly is higher in pitch, brighter and shorter in sustain.

The stated aim is the thick punch of pure maple with the dry sustain of aluminium, and the
mechanism supports the claim rather than merely asserting it.

## Snares get two sheets

The snare drum shell is different: twelve plies of maple with two aluminium sheets sandwiching
the middle plies rather than one replacing them. A snare is struck harder and asked for more
attack than a tom, and doubling the metal pushes the shell further towards the metallic end.

## Two edge angles

Toms are cut at 45 degrees, bass and snare drums at 60. DW's reasoning is straightforward: the
sharper tom edge frees the head for tonality and sustain, while the broader 60-degree edge on the
larger drums seats more head against wood for depth and punch.

Sixty degrees is the steeper cut in DW's terminology — more head resting on the shell, not less
— which is why it lands on the drums that need weight rather than ring.

## Two years of development

DW credits John Good and the Custom Shop team with two years of work on the shell, which is
consistent with the scale of the problem: bonding metal to wood in a moulded cylinder is
straightforward to describe and difficult to make consistent across every diameter and depth a
custom shop has to build.

Like the rest of the Collector's Series, SonicPly is specified drum by drum, with any of DW's
finish families applied over it.

## Sources

1. Collector's SonicPly 5-Piece Exotic Kit — Drum Workshop (tier 1) https://www.dwdrums.com/products/dckteamn05ad552-collector-s-sonicply-5-piece-exotic-kit/

---
Source: https://thedrumatlas.com/drum-kits/dw-collectors-sonicply · Values marked "unverified" are editorial knowledge awaiting a source.
