---
title: "Bucks County Prime Series"
brand: "Bucks County Drum Co"
category: "Drum kit"
url: "https://thedrumatlas.com/drum-kits/bucks-county-prime-series"
updated: "2026-09-24"
reviewed: "no"
---

# Bucks County Prime Series

The Prime Series is Bucks County's single-species kit: six- or eight-ply shells in one wood all the way through — ash, birch, cherry, mahogany, maple, oak or walnut — with 2.3mm triple-flanged hoops and a choice of full-length tube or beavertail lugs. Four named three-piece configurations run from an 18-inch bass drum to a 24.

**Sizes:** 12 × 8 in, 13 × 9 in, 14 × 13 in, 15 × 14 in, 16 × 15 in, 18 × 15 in, 20 × 16 in, 22 × 15 in, 24 × 14 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Shell material | One species throughout — ash, birch, cherry, mahogany, maple, oak or walnut | verified | Bucks County Drum Co |
| Plies | 6-ply toms; 8-ply toms | verified | Bucks County Drum Co |
| Reinforcement rings | Fitted on the 6-ply build; omitted on the 8-ply | verified | Bucks County Drum Co |
| Bearing edge | Round-over on the 6-ply; double 45° on the 8-ply | verified | Bucks County Drum Co |
| Hoops | 2.3 mm triple-flanged | verified | Bucks County Drum Co |
| Lugs | Full-length tube, or beavertail | verified | Bucks County Drum Co |
| Hardware finish | Chrome, brass or black nickel | verified | Bucks County Drum Co |
| Configurations | Maestro 8×12, 13×14, 15×18; Artisan 8×12, 14×15, 16×20; The Jack 8×12, 15×16, 15×22; The Hero 9×13, 15×16, 14×24 | verified | Bucks County Drum Co |
| Made in | United States | verified | Bucks County Drum Co |

## One wood, all the way through

Almost every professional ply shell is a mixture. Maple outside and mahogany inside, birch cores under
maple faces, a walnut outer veneer over something cheaper — the layup is where most makers put their
design thinking.

Bucks County goes the other way. The Prime shell is **100% the same species** in every ply, and the
shop's stated belief is that a great and resonant drum can be built from one premium timber.

What that buys is a drum whose character is legible. A mixed shell's voice is an average of its woods
and of how they are ordered; a single-species shell sounds like the wood it is made of. Choose cherry
and you get cherry — bright, quick, light — rather than cherry moderated by whatever is underneath it.

Seven woods are offered, and they are genuinely different instruments: ash is springy and cutting,
mahogany warm and low-mid heavy, oak hard and loud, birch scooped, cherry fast, walnut dark, maple even.

## Six plies or eight, and the edge that comes with it

The ply count is a choice, and it is not just about thickness — each count comes with its own edge.

**Six-ply** shells get **reinforcement rings** and a **round-over** bearing edge. Thinner shell, more
movement, a broad contact patch at the head: warm, round, vintage-leaning, with the rings holding the
shell true.

**Eight-ply** shells get **double 45-degree** edges and **no rings**. Thicker shell, less movement, a
narrow contact patch: brighter, more projecting, more sustain in the head rather than in the wood.

Those are the two poles of shell design offered as a single question at the point of order, which is
unusually clear. Most makers pick one and build a line around it.

## Four kits with names

Maestro, Artisan, The Jack, The Hero — four three-piece configurations spanning the whole useful range
of drumset sizes.

The **Maestro** is the small one: 15 by 18 bass drum, 13 by 14 floor tom, 8 by 12 rack. A jazz and
small-room kit.
The **Artisan** steps up to a 16 by 20 with a 14 by 15 floor tom.
**The Jack** is the all-rounder at 15 by 22 with a 15 by 16 floor tom.
**The Hero** takes the bass drum to **14 by 24** — big diameter, shallow depth, which is the vintage
recipe for a drum that is huge without being slow.

Matching snares are listed at $599 against a kit price of $2,295 to $2,695, which is the shop quietly
making it easy to have the snare cut from the same log as the rest.

## Finishes, priced honestly

Satin is the standard and costs nothing. A single colour stain adds $150, a burst or fade $300, a wrap
$400, gloss $500, and a gloss burst or fade $600.

Publishing that ladder is a small act of transparency worth noting. Finish work is where custom drum
prices usually disappear into "call for a quote", and a shop that lists the increments is telling you
exactly what the shiny version costs before you ask.

## Sources

1. Prime Series — Bucks County Drum Co (tier 1) https://www.buckscountydrumco.com/product/prime-series/
2. Bucks County Drum Co — Bucks County Drum Co (tier 1) https://buckscountydrumco.com/

---
Source: https://thedrumatlas.com/drum-kits/bucks-county-prime-series · Values marked "unverified" are editorial knowledge awaiting a source.
