---
title: "Zildjian A 14\" New Beat Hi-Hats"
brand: "Zildjian"
category: "Cymbal"
url: "https://thedrumatlas.com/cymbals/zildjian-a-14-new-beat-hi-hats"
updated: "2026-09-24"
reviewed: "no"
---

# Zildjian A 14" New Beat Hi-Hats

The Zildjian A 14" New Beat Hi-Hats are a B20 cast bronze pair with a medium top over a heavy bottom, symmetrically machine hammered and lathed with a traditional wide groove. Designed with Louie Bellson, the 14-inch pair is the size the model is built around and one of the most widely used hi-hats made.

**Sizes:** 14 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Hi-hats | verified | Zildjian |
| Alloy | B20 bronze — 80% copper, 20% tin, traces of silver | unverified | Modern Drummer |
| Weight | Medium top, heavy bottom | verified | Zildjian |
| Hammering | Symmetrically machine hammered | verified | Zildjian |
| Lathing | Traditional wide groove | verified | Zildjian |
| Character | All-purpose combination of stick and chick, pure, bright and expressive | verified | Zildjian |
| Catalogue number | A0133 | verified | Zildjian |
| Made in | United States | verified | Zildjian |

## Why the heavy bottom matters

The New Beat is a medium top on a heavy bottom, and that asymmetry is the whole design. Louie
Bellson asked for a pair with a solid beat and a definite chick, and a heavy bottom cymbal
gives both: it does not flex away under the stick, and when the foot closes the pair the air
is forced out cleanly instead of sighing.

A matched pair of two medium cymbals sounds looser and washier. That is a legitimate sound —
several K pairs are built that way — but it is not this one.

## 14 inches, and what the other sizes do

New Beats are made from 12 to 15 inches. The 14 is the standard and the one almost everyone
means: small enough to close quickly and articulate a fast pattern, big enough that the
backbeat has weight.

The 13 is tighter and higher and sits further back in a mix. The 15 is slower to close, with
more wash half-open and a lower chick. Neither is a substitute for the 14, which is why the
14 is what ships in nearly every pack.

## Wide-groove lathing

Traditional wide grooves and symmetrical machine hammering are what give this pair its even,
predictable voice — the overtones are regular rather than scattered. Hand hammering produces
more complexity; uniform machine hammering produces more consistency, and for a hi-hat that
has to do the same thing eight times a bar, consistency is the point.

## Sources

1. A Zildjian New Beat HiHats — Zildjian (tier 1) https://zildjian.com/products/a-zildjian-new-beat-hihats
2. What You Need to Know About… Cymbal Alloys — Modern Drummer (tier 2) https://www.moderndrummer.com/2011/10/what-you-need-to-know-about-cymbal-alloys/
3. About Us — Zildjian (tier 1) https://zildjian.com/pages/about-us

---
Source: https://thedrumatlas.com/cymbals/zildjian-a-14-new-beat-hi-hats · Values marked "unverified" are editorial knowledge awaiting a source.
