---
title: "Yamaha YM-4600A Marimba"
brand: "Yamaha"
category: "Concert percussion"
url: "https://thedrumatlas.com/concert-percussion/yamaha-ym-4600a-marimba"
updated: "2026-09-24"
reviewed: "no"
---

# Yamaha YM-4600A Marimba

The YM-4600A is Yamaha's 4⅓-octave professional marimba, A25 to C76, on graduated Honduran rosewood bars. The cutaway resonators carry a three-position tracking system and cut weight while adding strength, and the frame adjusts by pneumatic strut. It is 86¾ in long against the five-octave's 108¼.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Marimba | verified | Yamaha |
| Range | 4⅓ octaves, A25–C76 | verified | Yamaha |
| Bars | Honduran rosewood, graduated | verified | Yamaha |
| Bar sizes | Graduating from 2½ to 1⅝ in wide and 1 to ¾ in thick | verified | Yamaha |
| Resonators | Cutaway design with a 3-position tracking system, brushed tan finish | verified | Yamaha |
| Pitch | A = 442 Hz; other pitches to special order | verified | Yamaha |
| Height adjustment | 33⅞ to 39¾ in, by pneumatic strut | verified | Yamaha |
| Frame | Hinged resonators and rails with a two-piece crossbar; 4 in casters | verified | Yamaha |

## Four and a third octaves

A25 to C76: from the A below the bass staff up to the top C. This is the range most concert band
and orchestral marimba writing sits in, and the range the standard études and most ensemble parts
were written for. It stops a major sixth above the bottom of a five-octave instrument, and the
difference in the instrument is dramatic — 86¾ in long against 108¼, and correspondingly less to
move, store and pay for.

## Cutaway resonators

The resonator tubes below the low bars on a marimba are long, and on a full instrument they reach
nearly to the floor. A cutaway design flattens the profile so the lowest tubes fold rather than
hang straight, which Yamaha says both strengthens the assembly and reduces weight. The
three-position tracking system lets the resonator height under the bars be set, which changes how
much the tube couples to its bar — a brighter, more immediate sound or a rounder one with more
sustain.

## Graduated rosewood

The bars are Honduran rosewood and graduate from 2½ in wide at the low end down to 1⅝ in at the
top, thinning from 1 in to ¾ in as they go. That taper is what keeps the tone consistent across
the instrument rather than having a heavy bottom and a thin top.

## Setting it up

Hinged resonators and rails and a two-piece crossbar make it fold down; 4 in casters get it
across a rough floor; and the pneumatic struts let one person raise or lower the playing height
between 33⅞ and 39¾ in. Marimba height is personal — it decides the angle of the wrists over a
long piece — and an instrument shared between players in a school gets adjusted constantly.

## Sources

1. YM-4600A — Overview — Yamaha (tier 1) https://usa.yamaha.com/products/musical_instruments/percussion/marimbas/ym-4600a/index.html
2. YM-4600A — Specs — Yamaha (tier 1) https://usa.yamaha.com/products/musical_instruments/percussion/marimbas/ym-4600a/specs.html

---
Source: https://thedrumatlas.com/concert-percussion/yamaha-ym-4600a-marimba · Values marked "unverified" are editorial knowledge awaiting a source.
