---
title: "Studio 49 AGd Alto Glockenspiel, Series 2000"
brand: "Studio 49"
category: "Concert percussion"
url: "https://thedrumatlas.com/concert-percussion/studio-49-agd-2000"
updated: "2026-09-24"
reviewed: "no"
---

# Studio 49 AGd Alto Glockenspiel, Series 2000

The AGd is Studio 49's Series 2000 alto glockenspiel: sixteen silver-grey steel bars of 20 by 3mm, covering a diatonic c2 to a3 with F sharp and B flat included. Bars sit on rubber pins over rubber tubing, and two S 2 mallets are supplied. Studio 49 describes the sound as expressive and rich.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Alto glockenspiel, Orff-Schulwerk | verified | Studio 49 |
| Range | Diatonic c2–a3, including F sharp and B flat | verified | Studio 49 |
| Bars | 16, silver-grey premium steel | verified | Studio 49 |
| Bar section | 20 × 3 mm | verified | Studio 49 |
| Bar mounting | Rubber pins locating the bars, over rubber tubing | verified | Studio 49 |
| Included | Two S 2 mallets | verified | Studio 49 |
| Made in | Germany | verified | Studio 49 |

## Twenty by three millimetres

A glockenspiel bar is a small steel bar, and its two dimensions do very different things.

**Width** — 20mm here — sets how much surface there is to radiate sound. Wider bars are louder and
fuller. **Thickness** — 3mm — is what sets the pitch, along with length: a bar's frequency rises with
thickness and falls with the square of its length.

Twenty by three is a substantial section for an Orff glockenspiel. The instrument is loud for its size,
and every bar is cut to length from the same stock, so the pitch is in the cutting rather than in a
varying profile.

Studio 49 also ships the same instrument voice in other series with different bar materials, which is
what the series number encodes. This one is steel.

## Steel, and the long decay

Steel is the reason a glockenspiel sounds like a glockenspiel: very hard, very stiff, almost no internal
damping.

A struck steel bar rings for a long time, with strong upper partials well above the fundamental — which
is why a glockenspiel reads as bright and bell-like, and also why glockenspiel parts are written
sparsely. There is no damper on this instrument. Notes overlap until they decay, and the player manages
that by choosing what not to play.

The **silver-grey** finish is the bars left as steel rather than plated or lacquered, which is the
standard for instruments in this range.

## Rubber pins, rubber tubing

The Series 1600 xylophone uses flexible pins over textile tubing. This one uses **rubber** for both.

The choice follows the material. A steel bar is heavier than a wooden one and returns far more energy at
the point of support, so the support has to absorb more without damping the bar's ring. Rubber tubing
does that where a textile cord would compress and wear.

The pins locate rather than clamp, as on every Orff instrument, because the bars come off. That is the
whole pedagogy: leave only the notes the piece needs on the frame, and the class can play it.

## Where it sits

Two octaves starting at c2, an octave above the Series 1600 alto xylophone — which is what "alto"
means on a glockenspiel rather than on a xylophone, and a reliable source of confusion.

An Orff ensemble stacks these: soprano and alto glockenspiels at the top, soprano and alto xylophones
and metallophones in the middle, bass xylophone and bass metallophone underneath. Studio 49 builds all
of them, in the same series grades, so a room can be equipped in one order and the instruments will
match.

## Sources

1. AGd Alt-Glockenspiel Serie 2000 — Studio 49 (tier 1) https://studio49.de/shop/agd-alt-glockenspiel-serie-2000-deutsch-inkl-2-schlagel-s-2-1815
2. Royal Percussion — Studio 49 (tier 1) https://studio49.de/royal-percussion

---
Source: https://thedrumatlas.com/concert-percussion/studio-49-agd-2000 · Values marked "unverified" are editorial knowledge awaiting a source.
